Address 12120 Water St. Harlan Indiana 46742 Phone 260-657-5605 Fax 260-657-1004 Email info@sunequinox.com
Commercial
Light weight and suitable dimensions enable Sanicube hot water storage tanks to be easily incorporated into existing buildings. Therefore, large hot water storage tank systems can be connected in a modular manner to provide cost effective solutions.
The Modular Heat Exchanger Storage Tank System
The SUN Equinox enables a very wide range of system variants. It is possible to meet the most complex demands with the different heat exchanger designs in the SUN Equinox range. As a result, several heat sources can be integrated to produce additional heat extraction for a swimming pool or spas. In these cases, the whole systems usually remain relatively simple and clearly arranged and the control technology costs are generally low.
In the event of a subsequent change in the performance requirements, the system can often be modified very easily and flexibly without having to increase or decrease the number of SUN Equinox systems owing to the modular layout.
Applications
The calculation of the required number of SUN Equinox systems and the corresponding total heating output depends on the required maximum withdrawal quantity (withdrawal per unit of time) and on the withdrawal profile based on the dimensioning. Inside large widely dispersed buildings, it can also often be worthwhile to distribute several SUN Equinox decentralized outside the building and to install them as close as possible to the consumers, thereby minimizing heat losses and saving on pumps and expensive pipelines.
Hotels or hospitals often require large volumes of hot water instantly. The volume of heat stored in the SUN Equinox is so large that a momentary increase in demand can be covered, even if the recharging output of the heat generator is comparatively small.
Short-term hot water output for each SUN Equinox system unit therefore does not depend on the output of the heat generator to any great extent. If several SUN Equinox hot water heat exchanger storage tanks are connected to each other in a large system, the outputs of the individual storage tanks are added to each other.
